manualshive.com logo in svg

Kia Optima 2004, Owner'S Manual

The Kia Optima 2004 Owner's Manual is a comprehensive guide that allows you to effortlessly navigate and maintain your vehicle. Explore detailed instructions, helpful tips, and practical information, available for free download, at manualshive.com. Enhance your driving experience with this essential manual to ensure optimal performance and longevity.

Share
Download
background image

INSTRUMENT PANEL
LIGHT CONTROL
(RHEOSTAT)

The instrument panel lights can be made
brighter or dimmer by turning the
instrument panel light control knob.

LIGHTING

BATTERY SAVER FUNCTION

NOTICE :

• This function is operated in order

to prevent the battery from being
discharged by turning off the small
light automatically when the driver
removes the ignition key and opens
the driver-side door with leaving
the small light on.

• By applying this function, the tail

light shall be turned off automati-
cally even if the driver wants to
leave the light on in case of a tem-
porary parking alongside of the
road at night if the ignition key is
removed.
1) Open the driver-side door.
2) Turn off and on again the tail

light of the tail light switch.

LIGHTING CONTROL

To turn the lights on, twist the knob on
the end of the control lever which is
located on the steering column to the left
of the steering wheel.

First position

Tail, position, parking, license and
instrument panel lights ON.

Second position

Head, tail, parking, license and instr-
ument panel lights ON.

4-27

EMSA4024A

OFF

1st

2nd

TCS

ON  OFF

CRUISE

EMSA4023

Summary of Contents for Optima 2004










































































































































































































































Reviews:

No comments

Related manuals for Optima 2004

A-Tach Mounts ST-1 Instructions preview
ST-1
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50291 Quick Start Manual preview
50291
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50206 Instructions preview
50206
Brand: A-Tach Mounts Pages: 2
hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
Edelbrock Chevrolet 5783 Installation Instructions preview
Chevrolet 5783
Brand: Edelbrock Pages: 1
FORM FIT 1308 Installation Instructions preview
1308
Brand: FORM FIT Pages: 2
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
Draw tite 24943 Installation Instructions preview
24943
Brand: Draw tite Pages: 4
Mercedes-Benz CLS 280 2008 Owner'S Manual preview
CLS 280 2008
Brand: Mercedes-Benz Pages: 329
Caltrend BM110 Installation Instructions preview
BM110
Brand: Caltrend Pages: 2
Advanced ICE 1296-1 Manual preview
1296-1
Brand: Advanced ICE Pages: 4
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
Tellur BASIC TLL171231 User Manual preview
BASIC TLL171231
Brand: Tellur Pages: 5
ULTIMATE SPEED 91449 Operation And Safety Notes preview
91449
Brand: ULTIMATE SPEED Pages: 34
Mopar 82214480 Manual preview
82214480
Brand: Mopar Pages: 17

Brands by name

Popular brands

Load more brands