manualshive.com logo in svg

Kia Optima 2004, Owner'S Manual

The Kia Optima 2004 Owner's Manual is a comprehensive guide that allows you to effortlessly navigate and maintain your vehicle. Explore detailed instructions, helpful tips, and practical information, available for free download, at manualshive.com. Enhance your driving experience with this essential manual to ensure optimal performance and longevity.

Share
Download
background image

MAINTENANCE

7-36

CENTER HIGH-MOUNTED
STOPLIGHT BULB
REPLACEMENT

1. Remove the cover and turn the bulb

socket counterclockwise and remove
it from the housing.

2. push the bulb in, then rotate it one-

quater turn counterclockwise and
remove the bulb from the socket.

3. Insert a new bulb in the socket, then

push the bulb in and rotate it one-
quarter turn counterclockwise and
remove the bulb from the socket.

4. Re-install the bulb socket into the

rear combination light assembly and
rotate it one-quarter turn clockwise to
lock the socket in place.

5. Re-install the cover.

TRUNK ROOM LIGHT BULB
REPLACEMENT
(IF EQUIPPED)

1. Remove the trunk room lamp cover

using flat blade screw driver.

2. After replacement of bulb, install the

cover.

EMSA7030

EMSA7031

Summary of Contents for Optima 2004










































































































































































































































Reviews:

No comments

Related manuals for Optima 2004

Yamaha Yamaha Rhino 660 Instruction Supplement preview
Yamaha Rhino 660
Brand: Yamaha Pages: 3
Dometic PERFECTVIEW CAM80AHD Installation And Operating Manual preview
PERFECTVIEW CAM80AHD
Brand: Dometic Pages: 196
RBP STEALTH POWER RBP-216-SP Installation Manual preview
STEALTH POWER RBP-216-SP
Brand: RBP Pages: 16
HURST STREET SUPER SHIFTER Installation Instructions preview
STREET SUPER SHIFTER
Brand: HURST Pages: 2
Enduro autoSteady AS101 User Manual preview
autoSteady AS101
Brand: Enduro Pages: 48
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
Connects2 CTUPO01 Quick Start Manual preview
CTUPO01
Brand: Connects2 Pages: 8
Ford C-Max Energi 2014 Quick Reference Manual preview
C-Max Energi 2014
Brand: Ford Pages: 10
PMT AS7.M100.001 User Manual preview
AS7.M100.001
Brand: PMT Pages: 16
Subaru impreza 2017 Owner'S Manual preview
impreza 2017
Brand: Subaru Pages: 786
QA1 MU1RCA Install Instructions preview
MU1RCA
Brand: QA1 Pages: 4
Volkswagen RCD550 Installation Manual preview
RCD550
Brand: Volkswagen Pages: 4
Toyota 1991 CAMRY Body Section Repair Manual preview
1991 CAMRY Body Section
Brand: Toyota Pages: 111
Chrysler 200 Sedan 2012 Specifications preview
200 Sedan 2012
Brand: Chrysler Pages: 6
Chrysler 200 CONVERTIBLE 2011 Specifications preview
200 CONVERTIBLE 2011
Brand: Chrysler Pages: 5
GMC 2013 Terrain Owner'S Manual preview
2013 Terrain
Brand: GMC Pages: 364
VBG 56-239200 Mounting Instruction/Spare Parts List preview
56-239200
Brand: VBG Pages: 20

Brands by name

Popular brands

Load more brands