GENERAL
TREBLE CONTROL (3
②
rd
setting)
To adjust the treble tone level, first select the treble mode by pressing button
②
until
“TREBLE” appears on the display panel. Within 5 seconds of selecting the treble mode, turn
button
②
right or left to adjust the treble level as desired. The treble level will be shown on
the display panel from a minimum of “TREBLE -10” to a maximum of “10”. The
display will automatically return to the normal indication in 5 seconds after the last adjustment,
or when another function is activated.
②
BALANCE CONTROL (4
th
setting)
To adjust the left-right speaker balance, first select the Balance mode by pressing the Select
button
②
until the “BAL” indication appears on the display panel. Within 5 seconds of
choosing the Balance mode, turn right/left to adjust the balance as desired. The balance
position will be shown by the bars on the display panel from “BAL 10L” (full left) to “BAL
10R”(full right). When the volume level between the left and right speakers is equal, “BAL
L=R” will be shown on the display panel. The display will automatically return to the normal
indication in 5 seconds after the last adjustment or when another function is activated.
②
FADER CONTROL (5
th
setting)
To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select
button
②
until the “FADER” indication appears on the display panel. Within 5 seconds of
choosing the Fader mode, turn right/left to adjust the front-rear speaker level as desired.
The fader position will be shown by the bars on the display panel from “FADER 10F” (full
front) to “FADER 10R”(full rear). When the volume level between the front and rear speaker
is equal, “FADER F=R” will be shown on the display panel. The display will automatically
return to the normal indication in 5 seconds after the last adjustment or when another
function is activated.
BEEP CONTROL (6
②
th
setting)
To adjust the Beep mode, first select the Beep mode by pressing the Select button
②
until
“BEEP” appears on the display panel. The Beep mode will be shown on the display panel
from “BEEP 2ND”, “BEEP OFF” and “BEEP ON”. The display will automatically return to the
normal indication in 5 seconds after the last adjustment or when another function is activated.
Select “BEEP ON” when you wish to hear the “BEEP” sound whenever any function button is
pressed. Select “BEEP 2ND” when you wish to hear the “BEEP” sound whenever any Tuner
Pre-set button and/or Track cue or review buttons are pressed. Once the desired setting is
displayed, press button
②
to save your selected setting
.
②
LOUDNESS CONTROL (7
th
setting)
When listening to music at low volume levels, this feature will boost the bass and treble
response. This action will compensate for the reduction in bass and treble performance
experienced at low volume. To select the loudness feature, press button
②
until “LOUD ON”
or “LOUD OFF” is displayed, and then turn button
②
left or right to activate or deactivate
loudness.
③
WARNING LED
This LED lamp blinks every 1 second when the ignition is turned OFF.
22