GENERAL
①
POWER ON/OFF BUTTON
Press button
①
momentarily to turn the set on or off. When the set is next switched on, the
previous mode and disc play position will be restored.
VOLUME UP/DOWN CONTROL
①
Turn button
①
right to increase the volume level. The level will be shown as “VOLUME xx” on
the display panel. Turn button
①
left to decrease the volume level. After 5 seconds the
display will return to the previous mode.
START
①
-UP VOLUME LEVEL SET UP
Start-up volume is the volume level the set will play at when next turned on. To adjust the
start-up volume, press and hold button
①
longer than 3 seconds. The current start-up volume
level is displayed as a flashing number on the display panel.
Turn button
①
left or right to increase or decrease the volume, then press button
①
again to
set that volume level as the start-up volume level.
②
SOUND SETTING SELECTION
This button is to adjust the sound. Each time you momentary press button
②
, LCD displays
each mode as follows:
BASS
→
MIDDLE
→
TREBLE
→
BAL L=R
→
FADER F=R
→
BEEP 2ND
→
LOUD ON
On each setting, the level can be controlled by turning button
②
. The display will
automatically return to the previous mode 5 seconds after the last adjustment is made.
Note:
When the EQ mode is activated, the BASS, MIDDLE, TREBLE and LOUD modes are
not displayed.
BASS CONTROL (1
②
ST
setting)
To adjust the bass tone level, first select the bass mode by pressing button
②
until “BASS”
appears on the display panel. Within 5 seconds of selecting the BASS mode, turn button
②
right or left to adjust the bass level as desired. The bass level will be shown on the display
panel from a minimum of “BASS –10” to a maximum of “BASS+10”. The display will
automatically return to the normal indication in 5 seconds after the last adjustment, or when
another function is activated.
MIDDLE CONTROL (2
②
nd
setting)
To adjust the mid tone level, first select the middle mode by pressing button
②
until
“MIDDLE” appears on the display panel. Within 5 seconds of selecting the middle mode, turn
button
②
right or left to adjust the mid level as desired. The mid level will be shown on the
display panel from a minimum of “MIDDLE -10” to a maximum of “10”. The display
will automatically return to the normal indication in 5 seconds after the last adjustment or,
when another function is activated.
21