manualshive.com logo in svg

Kia 2007 Magentis, Owner'S Manual

Share
Download
Kia 2007 Magentis Owner'S Manual Download Page 232

In case of an emergency

14

6

When towing your vehicle in an emer-
gency without wheel dollies :
1. Set the ignition switch in the ACC posi-

tion.

2. Place the transaxle shift lever in N

(Neutral).

3. Release the parking brake.

✽

✽

NOTICE

Failure to place the transaxle shift lever

in N (Neutral) may cause internal dam-

age to the transaxle.  

Tie-down hook 
(for flatbed towing)

CAUTION

Do not use the hooks under the front of the vehicle for towing purposes.
These hooks are designed ONLY for transport tie-down. If the tie-down hooks
are used for towing, the tie-down hooks will be damaged and this could lead
to serious injury.

Tie-down hook

OMG065009/OMG065010

Ofrecido por www.electromanuales.com

Summary of Contents for 2007 Magentis


































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands