manualshive.com logo in svg

Kia 2007 Magentis, Owner'S Manual

Share
Download
Kia 2007 Magentis Owner'S Manual Download Page 118

3 109

Knowing your vehicle

3. FF/REW Button 

If you want to fast forward or reverse
through the compact disc track, push and
hold the

or 

button.

When you release the button, the com-
pact disc player will resume playing.

4. REPEAT (RPT) Button

• To repeat the track you are currently

listening to, press the RPT button. To
cancel, press it again.

• If you do not release RPT operation

when the track ends, it will automati-
cally be replayed.
This process will be continued until you
push the button again or turn the
Power OFF then ON.

5. CD SCAN Button

• To playback the first 10 seconds of

each track, press the CD SCAN button.

• Press the CD SCAN button again with-

in 10 sec. when you have reached the
desired track.

6. CD EJECT Button

When the 

button is pressed with a CD

loaded, the CD will eject.
Forcing to eject : To force to eject a CD,
press this button for more than 3 sec-
onds.
(Do this only when a CD is jammed and
you can not eject it in the normal way -
e.g.) in case that you have inserted 2
CDs by mistake)

7. RANDOM (RDM) Button

With random, you can listen to the tracks
in random, rather than sequential order.
To use random, do the following:
Press the RDM button to listen to record-
ed tracks in random sequence. Press
RDM again to cancel or turn the power
OFF then ON. The unit defaults to playing
tracks in sequential order.

✽

✽

NOTICE

• To assure proper operation of the unit,

keep the vehicle interior temperature
within a normal range by using the
vehicle's air conditioning or heating
system.

• When replacing the fuse, replace it

with a fuse having the correct capaci-
ty.

• All stored bookmarks are all erased

when the car battery is disconnected
or power to the vehicle is lost. If this
occurs, the bookmarks will have to be
reset.

• This equipment is designed to be used

only in a 12 volt DC battery system
with negative ground.

• This unit is made of precision parts.

Do not attempt to disassemble or
adjust any parts.

• When driving your vehicle, be sure to

keep the volume of the unit set low
enough to allow you to hear sounds
coming from the outside.

• Do not expose this equipment (includ-

ing the speakers and CD) to water or
excessive moisture.

Ofrecido por www.electromanuales.com

Summary of Contents for 2007 Magentis


































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands