Kia 2007 Magentis Owner'S Manual Download

Page: 174 / 289

Driving your vehicle

Operation of the rear parking
assist system

Operating condition

• This system will activate when backing

up with the ignition key ON.
If the vehicle is moved at speed over
5 km/h (3 mph), the system may not
activated correctly.

• The sensing distance while the rear

parking assist system is in operation is
approximately 120 cm (47 in.).

• When more than two objects are

sensed at the same time, the closest
one will be recognized first.

Types of warning sound

• When an object is 120 cm to 81 cm (47

in. to 32 in.) from the rear bumper :
Buzzer beeps intermittently

• When an object is 80 cm to 41 cm (31

in. to 16 in.) from the rear bumper :
Buzzer beeps more frequently

• When an object is within 40 cm (15 in.)

of the rear bumper : Buzzer sounds
continuously.

Non-operational conditions of
rear parking assist system

Rear parking assist system may not
operate normally when:

1. Moisture is frozen to the sensor. (It will

operate normally when moisture
melts.)

2. Sensor is covered with foreign matter,

such as snow or water, or the sensor
cover is blocked. (It will operate nor-
mally when the material is removed or
the sensor is no longer blocked.)

3. Driving on uneven road surfaces

(unpaved roads, gravel, bumps, gradi-
ent).

4. Objects generating excessive noise

(vehicle horns, loud motorcycle
engines, or truck air brakes) are within
range of the sensor.

5. Heavy rain or water spray exists.
6. Wireless transmitters or mobile phones

are within range of the sensor.

7. Sensor is covered with snow.
8. Trailer towing

Detecting range may decrease when:

1. Sensor is stained with foreign matter

such as snow or water. (Sensing range
will return to normal when removed.)

2. Outside air temperature is extremely

hot or cold.

Following objects may not be recog-
nized by the sensor:

1. Sharp or slim objects such as ropes,

chains or small poles.

2. Objects which tend to absorb sensor

frequency such as clothes, spongy
material or snow.

3. Undetectable objects smaller than 1 m

(40 in.) and narrower than 14 cm (6 in.)
in diameter.

Ofrecido por www.electromanuales.com

Summary of Contents for 2007 Magentis


































































































































































































































































































Search results

Summary of Contents for 2007 Magentis

Reviews:

Related manuals for 2007 Magentis

Brands by name

Popular brands

Kia 2007 Magentis, Owner'S Manual

Search results

Summary of Contents for 2007 Magentis

Reviews:

Related manuals for 2007 Magentis

Brands by name

Popular brands