Kia 2007 Magentis Owner'S Manual Download

Page: 103 / 289

Knowing your vehicle

The steering wheel audio remote control
button is installed to promote safe driv-
ing.

✽

NOTICE

Do not operate audio remote control
buttons simultaneously.

MODE

Press the MODE button to select Radio,
Tape (if equipped) or CD (compact disc).

MUTE

• Press the MUTE button to deactivate

the sound.

• Once again press the MUTE button to

reactivate the sound.

VOL (

▲

▼

)

• Press the VOL (

▲

) button to increase

volume.

• Press the VOL (

▼

) button to decease

volume.

SEEK/PRESET (

▲

▼

)

If the button is pressed for 0.8 second or
more, it will work as follows in each
mode.

RADIO mode

It will function as the AUTO SEEK select
button.

TAPE mode

It will function as the FF/REW button.

CDP mode

It will function as the FF/REW button.

CDC mode

It will function as the DISC UP/DOWN
button.

If the button is pressed for less than 0.8
second, it will work as follows in each
mode.

RADIO mode

It will function as the PRESET STATION
select buttons.

TAPE mode

It will function as the AUTO MUSIC
Search(AMS) button.

CDP mode

It will function as the TRACK UP/DOWN
button.

CDC mode

It will function as the TRACK UP/DOWN
button.

Detailed information for audio control
buttons is described in the following
pages in this section.

AUDIO REMOTE CONTROL (IF EQUIPPED)

OMG045080C

OMG045081C

Type A

Type B

Ofrecido por www.electromanuales.com

Summary of Contents for 2007 Magentis


































































































































































































































































































Search results

Summary of Contents for 2007 Magentis

Reviews:

Related manuals for 2007 Magentis

Brands by name

Popular brands

Kia 2007 Magentis, Owner'S Manual

Search results

Summary of Contents for 2007 Magentis

Reviews:

Related manuals for 2007 Magentis

Brands by name

Popular brands