manualshive.com logo in svg

Kia 2007 Magentis, Owner'S Manual

Share
Download
Kia 2007 Magentis Owner'S Manual Download Page 231

6 13

In case of an emergency

TOWING

If emergency towing is necessary, we
recommend having it done by an author-
ized Kia dealer or a commercial tow-truck
service. Proper lifting and towing proce-
dures are necessary to prevent damage
to the vehicle. The use of wheel dollies or
flatbed equipment is recommended.
For trailer towing guidelines information,
refer to section 5 “Driving Tips”.

It is acceptable to tow the vehicle with the
rear wheels on the ground (without dol-
lies) and the front wheels off the ground.
When being towed by a commercial tow
truck and wheel dollies are not used, the
front of the vehicle should always be lift-
ed, not the rear.

✽

✽

NOTICE

• Do not tow the vehicle backwards

with the front wheels on the ground as

this may cause damage to the vehicle.

• Do not tow with sling-type equipment.

Use wheel lift or flatbed equipment.  

1JBA6502

1JBA6501

OMG065025

OMG065024

Ofrecido por www.electromanuales.com

Summary of Contents for 2007 Magentis


































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands