KI ROGUE 2, Technical Manual

Page: 4 / 58

3
Tools
Please see the list below to identify the tools needed throughout this tech manual. Always
check tools to ensure the ends are not stripped and that the tool can perform its function
properly without damaging any parts or hardware on the chair.
Frame Tube Size Guide
*Tubing sizes subject to change without notice*
This information is a reference for situations where the tube sizes are needed for certain
attachments.
Tools Needed
• 2.5mm Allen Wrench • Two 8mm Wrenches
• 3mm Allen Wrench • Two 10mm Wrenches
• 4mm Allen Wrench • 13mm Wrench
• 5mm Allen Wrench • 17mm Wrench
• 5.5mm Allen Wrench • 19mm Wrench
• 6mm Allen Wrench • 24mm Wrench
• Utility Blade • Phillips Screwdriver
• Torque Wrench • Punch (or small screwdriver)
• Rubber Mallet
Rogue 2
Frame Tube
Frame Tube: 1 3/8”
Camber Tube: 1 1/8”
Back Canes
Fixed Height Back Canes: 1”
Rigidizer Bar: 7/8”
Lower Height Adjustable Back Tube: 1”
Upper Adjustable Upper Back Tube: 3/4”
Half Folding Back: 7/8”
Arms
Swing Away: 1”
Upper T-Arm: 7/8”
Transfer Tube T-Arm: 3/4”
Angle Adjustable Flip Up: 1”
Footrests
Footrest Tubes: 3/4”