4
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Genesis
®
Desking - Cross Brace & Wire Trough
Assembly Instructions
1
1
/ -20 x / ”
hex head
screw
4
2
cross brace
standard leg
Figure 8 - Two Leg Desk
Detail B
Detail C
1
1
/ -20 x / ”
hex head
screws
4
2
cross brace
wire trough
1
1
/ -20 x / ”
hex head
screw
4
2
Figure 9 - Three Leg Desk
Detail D
Cross Brace and/or Wire Trough
Installation
Note:
If optional leg-mounted
privacy screens are to be installed,
privacy screen brackets must be
installed before proceeding with
“Cross Brace and/or Wire Trough
Installation” instructions. If privacy
screen brackets are not installed,
reference “Privay Screen(s)
Installation” instructions on page 2.
Note:
Height-adjustable table bases
are built without the worksurface and
require cross braces to increase the
desk stability.
1. Remove rear leg covers.
2.
For two leg desks
, slide the cross
brace or wire trough into the opening
between the back of the leg and the
bracket. Attach to each standard
leg using two
1
/
4
-20 x
1
/
2
” hex head
screws (Figure 8 & Details B & C).
For three leg desks
, cross brace
and wire trough have a bent tab on
one end for attaching to the post leg.
Slide the cross brace or wire trough
bent tap into the opening between
the back of the leg and the bracket.
Attach using two
1
/
4
-20 x
1
/
2
” hex
head screws (Figure 9 & Detail D).
