manualshive.com logo in svg

Kguard Easy Link PRO EL1622, User Manual

Share
Download
Kguard Easy Link PRO EL1622 User Manual Download Page 68

ENGLISH

Easy Link PRO Series: Operating the DVR

68

DVR User’s Manual

When the backup is complete, click 

OK

 to close the Backup Status screen.

NOTE:

 

Do not remove the USB device while file transferring is in progress.

Search: Log

The 

Log

 menu displays a list of events, presented in chronological order: the most recent events will be at the end of 

the list. The 

Log

 will list all events that the DVR monitored.

•  Log Type

: Select the log type among 

All

, 

System

, 

Config

, 

Alarm

, 

Account

, 

Record

 or 

Storage

. 

•  Start Time/End Time

: Specify the start and end date/time of the logs you want to review and/or save on an 

external USB storage device. Click 

Search

. The logs will be listed on the table. 

NOTE:

 If you want to backup the log to an external storage, make sure the USB storage device is connected into 

the USB port of the DVR.

Summary of Contents for Easy Link PRO EL1622










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands