ENGLISH
Chapter 5: KGUARD Web Client
DVR User’s Manual
91
• If you cannot use the either of the two default ports, 80 or 9000, the specified port may be occupied by other
programs or it is being blocked by your service provider. Enter other port number. In this case, you need to
add the port number after the IP address. For example, if you set the
HTTP Port
as 85, you need to enter the
IP address as “192.168.3.103:85”.
4
Enter other parameter settings (if applicable).
• If your network connection is
Static
, specify the static IP address, Subnet Mask, Gateway, and DNS 1/DNS 2 IP
addresses.
• If your network connection is
PPPoE
, enter the User Name and Password that you setup with your DSL service
provider. Then, specify the DNS 1/DNS 2 IP addresses.
Note:
The system supports two DNS server input options: DNS Server1 for main server and DNS Server2 for sub server.
Please contact your local ISP (Internet Service Provider) to obtain the correct DNS Server parameter.
5
To enable
Auto Port Forwarding (UPNP)
feature, select
Enable
.
Note:
Not all routers support the Auto Port Forwarding feature. If this function does not work, you must manually open
the ports in your router.
6
After all settings are complete, click
Save
.
« TIP »
To cancel any modifications and retain the existing settings, click
Refresh
.
