manualshive.com logo in svg

KGuard Security Easy Link EL1621, User Manual

Share
Download
KGuard Security Easy Link EL1621 User Manual Download Page 74

ENGLISH

Chapter 4: Using the DVR

74

DVR User’s Manual

Save System Settings

Use this feature to save the DVR current settings.

1 

Insert the USB flash drive into a USB port of the DVR.

2 

In preview mode, right-click on the mouse to display the Pop-up menu.

3 

Select 

Main Menu

 

 > 

ADVANCED

.

4 

Click 

Save Settings

. 

5 

When data exporting is complete, click 

OK

.

Note:

Do not remove the USB device while file transferring is in progress.

Load System Settings

Use this feature to import the settings stored in the USB flash drive.

1 

Insert the USB flash drive into a USB port of the DVR.

2 

In preview mode, right-click on the mouse to display the Pop-up menu.

3 

Select 

Main Menu

 

 > 

ADVANCED

.

4 

Click 

Load Settings

. 

5 

When data importing is complete, the system will automatically reboot.

Summary of Contents for Easy Link EL1621



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands