KGK CCS3000L, Instruction Manual, Page: 6 / 62

6
Introduction
Checking
In case of emergency
Precautions for handling
Direction
This product is also designed for IT power distribution system with phase-to-phase voltage
230V.
Direction
This AC outlet shall be installed near the equipment and shall be easily accessible.
Danger
Prohibit
No one other than our service personnel may remove any covers unless otherwise instructed.
There are many high-voltage portions inside the equipment, which are hazardous.
Direction
If the power cord, communication cable, or input/output cable is connected or disconnected
while the power is on, the equipment may be damaged. When installing or moving this
product, opening its cover, or connecting the equipment, follow the procedure described in this
document.
Danger
Direction
When the equipment emits smoke
If the equipment emits smoke or gives off an unusual odor, immediately turn off the power, and
disconnect the power plug. Then, contact us. Further use in this condition may cause fire.
Direction
When foreign material enters the equipment
If foreign material (water, dust, etc.) enters the equipment, immediately turn off the power, and
disconnect the power plug. Then, contact us. Further use in this condition may cause fire.
Danger
Direction
Use a container made of conductive material and connect it to ground, if,
during test print or maintenance, print drops are collected in the container.
Print drops are electrically charged in a very small amount. If print drops accumulate, without
connecting the container to ground, the amount of electric charge can become so big to cause
fire.
In normal situations, however, the print substrate moves on the conveyor, hence there is no such
a big amount of accumulation of electric charge to cause fire.
Caution