
5
Power supply
Prohibit
Avoid tying power lines and other wires together in a bundle.
Direction
Air purging in the printhead with dry air
Air purging in the printhead is recommended. Be sure to do that, especially in the case of use in
humid surroundings or using pigment inks.
For specifications of the air, refer to "4-1 Product specifications" on page 50.
Danger
Prohibit
Banning the use of any power other than 100-240V, 50/60Hz
Do not use any power other than 100-240V, 50/60Hz.
Failure to observe this may cause fire or electrical shock.
Prohibit
Handling the power cables
Do not damage, alter or heat the power cable. Do not put any heavy object on it.
Failure to observe this may damage the cable, resulting in a fire or electric shock.
Caution
Prohibit
Prohibited connection/disconnection of the power cables while power is
turned on
Do no connect/disconnect the power cables while power is turned on.
Failure to observe this may damage the equipment.
When you install or transport this product, open the cover, or connect with any equipment, be
sure to connect or disconnect the cables according to the following procedures.
When connecting:
Turn OFF all equipment, including the externally connected sequencer, PC, etc.
Unplug this product.
Connect the cables to this product.
Plug in all the equipment.
Turn ON the power switches of all equipment.
When disconnecting:
Turn OFF all equipment, including externally connected sequencer, PC, etc.
Unplug this product.
Disconnect all cables that have been connected to this product.
Caution
Summary of Contents for CCS3000L
Page 9: ...9 ...
Page 37: ...37 ...
Page 59: ...59 ...
Page 61: ...61 5 2 Printhead 60 φ49 2 21 197 17 7 140 54 3 20 59 4 30 63 55 φ 2 0 Unit mm ...