Keysight N9913B User Manual Download Page 811

Page: 811 / 896

Keysight N9938-90006 User’s Guide 811

File Management
Saving and Recalling Files

—

USB

Saves/Recalls/Moves (Copies) files to or from a USB Flash drive

(not included) that is inserted in one of the USB connectors. Only the

root folder is available.

How to set File Type

— Press

Save/Recall 9

— Then

File Type

. Choose one of the following:

—

State

Saves ALL FieldFox instrument settings for ALL Modes to a

*.sta file. If a calibration is ON in CAT or NA Mode, calibration data is

also saved. This file can be opened ONLY by a FieldFox. State files

can be saved between compatible FieldFox models. See note

in.

“Saving and Recalling Files” on page 804

—

Trace+State

Saves the current trace and instrument settings to a

*.sta file. In SA Mode, all traces are saved. This file can be opened

ONLY by a FieldFox. When recalled, the FieldFox sweep is set to Hold.

—

Picture (PNG)

Saves a 640 x 453 pixel image of the FieldFox screen to

a *.png file. The picture does NOT include the softkeys.

—

Data (csv)

Saves trace data from the current Mode to a *.csv file. This

format can be imported into spreadsheet software such as Microsoft

Excel. Column A is always the frequency at which the data is

measured.

——In

SA Mode

, all visible data traces are saved. Each trace is

saved to a separate column that is labeled with the Trace

State.

——In

CAT

and

Modes, only the data trace is saved – not the

memory trace.

——In

Power Meter

(with Option 208 Frequency Offset Power

Sensor (FOPS)), all visible traces are saved. Each trace is saved

to a separate column labeled

Output Power

Memory

——In

VVM

Mode, NO data is saved.

Insert only ONE USB Flash Drive in the FieldFox when saving or copying

files.

When using RTSA, the Density Spectrum information is not saved using

Trace+State. Only the last displayed trace settings is saved.

Summary of Contents for N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands

Keysight N9913B, User Manual

Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands