Keysight N9913B User Manual Download Page 162

Page: 162 / 896

162 Keysight N9938-90006 User’s Guide

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings

—

Cable Off

– Opens a softkey menu to enable/disable a cable and edit,

save, create a new cable description table, recall, and set a storage

device location.

—

More

– Opens a softkey menu to View Corrections and set the

Amplitude Correction type for your antenna.
Learn more, see

“Selecting and Viewing Corrections” on page 162

—

More

– Edit/Recall an Antenna file to be used to transmit.

—

RcvrSide Antenna Off / On

Edit/Recall an Antenna file to be used to

receive.

—

SrcSide Cable Off / On

Edit/Recall a Cable file to be used on the

Source side.

—

RcvrSide Cable Off / On

Edit/Recall a Cable file to be used on the

Receiver side.

Selecting and Viewing Corrections

— Press

Scale/Amptd

More

Corrections

More

—

View Corrections ON OFF

Turn ON and OFF Pink Trace - Antenna/Cable

corrections. This is a composite of all cable/antenna corrections that are

currently applied. Available as a useful visual aid, the zero “dB” level (no net

correction) is mapped to appear at the -50 dBm on-screen level.

—

Amp Corr Select [Triaxial XYZ]

- then choose one of the following:

—

Default

Receiver side only antenna measurements.

—

Src/Rcvr Split

to work with non-triaxial receiver and source side

antenna measurements.

—

Triaxial XYZ

(default, when Channel Power is on and when a

compatible triaxial antenna’s factors have been imported) for

measuring channel measurements and EMF.

How to Use the Antenna Softkeys

The following menu appears when any of the above Antenna Off or Cable

softkeys are pressed:

—

Cable ON OFF

– Turn correction ON or OFF for this

Antenna/Cable.

—

Edit Antenna

Edit Cable

– Edit an Antenna/Cable Correction table. See

Using the Antenna/Cable Editor (below) for more information.

—

New

– Create a new Antenna/Cable. See Using the Antenna/Cable Editor

(below) for more information.

Summary of Contents for N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands

Keysight N9913B, User Manual

Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands