Keysight N9913B, User Manual

Page: 654 / 896

654 Keysight N9938-90006 User’s Guide
Channel Scanner (Option 312)
How to Set Up Channel Scanner
5. Optional: Auto Save ON (OFF = default)—When Auto Save is on, during
recording, the FieldFox stores intermediate results in a temporary file. If
the power fails during recording you can retrieve the results. Select Recall
Log File . Select the temporary file name.
Press Record Save/Recall > Auto Save On Off > On
Optional Step: Indoor Map Data Logging
Once you have selected a channel to measure, you can record data logging
using Indoor Mapping. Refer to “Step 1A: Scan Mode: Range Channel
Defined” on page 643 .
Learn more, see “How to Set Up Channel Scanner” on page 639 , step 4 .
1. Press Measure 1 > Data Logging > More then
2. Press Indoor Map Data Logging then
— Record Indoor Data (new indoor mapping file (*.png)) or Recall
Indoor Log File (recall a previously stored *.kdat, to modify). Learn
more, refer to Chapter 16 Mapping and “Option 352 Indoor Maps
Setup Procedure” on page 485 and “Setting up Data Logging” on
page 497 .
3. Measurements are displayed on the current indoor map in the specified
intervals.
— Use More > Data Selection softkey menu to select the Channel
displayed, the Sort Power Freq , and the Sort Order Up Down .
Then Back .
— Use the Labels & Icons softkey menu to select Labels OFF ON , Icons
Flag Point Line , and Pointer OFF ON .
Then Back .
Learn more, refer to Chapter 16 Mapping and to “Enabling and
Setting Up Indoor Map Logging” on page 500 .
Use the Labels & Icons , RPG [Zoom] settings, Save Map , and Save
Image (PNG) .
Learn more, refer to Chapter 16 Mapping and to “Enabling and
Setting Up Indoor Map Logging” on page 500 .
— Use the PAN softkey menu to change locations on the indoor map.
4. To begin recording (add a data point): Press Record Data .
5. Optional: Set Bearing Line , refer to “Enabling and Setting Up Indoor Map
Logging” on page 500 .
6. Repeat steps 4 and 5 as necessary.