Keysight N9913B User Manual Download Page 785

Page: 785 / 896

Keysight N9938-90006 User’s Guide 785

System Settings
System Configuration

—

Without Option 307

, GPS is usable ONLY with an external GPS receiver that

is shipped with Microsoft “Streets and Trips” and “AutoRoute”. The GPS

receiver is NOT available from Keysight. Only the GPS USB receiver is used

with the FieldFox. Therefore, it is NOT necessary to purchase the very latest

version of the map software.

How to make GPS settings

GPS settings are the same with, or without, Option 307.
Your GPS settings can be saved with Preferences. Learn more in

“Quick

Settings Table” on page 770

Press

System 7

System Configuration

GPS

Then choose from the following:

Display ON OFF

Enable and disable the GPS display on the FieldFox main

window.

GPS

then choose from:

—

OFF

- Disable GPS (default setting).

—

External

- Enable GPS using an external, customer-supplied, USB

dongle device. A check is made to detect a USB GPS device at the

USB connectors.

—

Internal

- Enable GPS using Option 307 – Built-in GPS. Connect a

GPS antenna to the top-panel GPS connector. Learn more about

additional GPS antenna accessories at

http://www.keysight.com/find/fieldfox

. Internal is set automatically

when Frequency Reference Source is set to GPS. Learn more in

“Frequency Reference Source” on page 789

When Internal or External is selected, a search is made for satellites overhead.

GPS works best when outdoors and in full view of the open sky. When several

satellites are found, the following screen appears (when Display is set to ON)

and is updated frequently:

As the bar graph count exceeds 9 bars, the “dB” text is dropped from the

number displayed on the bar. Units for C/No are dBHz.

Summary of Contents for N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands

Keysight N9913B, User Manual

Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands