Keysight N5990A Type-C Multi-Standard Solution User Guide
43
Test Procedures
6
If the PDO node is selected, the property panel shows the information of all
the selected PDOs and some configurable parameters which are described
as following:
• Do Auto Iteration through PDO list? If it is set to true, each selected
PHY test will be done with each of the selected PDO applied to the
DUT.
Figure 23
PDO test iteration
• Save a Workbook after each PDO step?: If it is set to true, for each
single PDO the set of test results is saved in an html-workbook.
• Path for autosaved Workbooks: Set here the location of the saved
workbook.
To get the relevant information about them, refer to the base manual of
the particular application. Following are the references:
Section 4.5.2 of the “Keysight N5990A Test Automation Software Platform
for USB”
Chapter 6 of the “Keysight N5990A-155 Test Automation Software
Platform for Display Port”
NOTE
The list of tests is not affected by the selection of the PDOs.
Summary of Contents for N5990A Type-C
