Keysight N5990A Type-C Multi-Standard Solution User Guide
39
Calibrations Procedures
5
Calibrations for Rx Tests
The calibration procedures for the Rx Type C tests are the same as for the
pure standards.
For the detailed description of each calibration, refer to the documentation
of each standard.
Standard combination USB-RX & USB-TX
The Rx-signal path in the standard combination
USB-RX & USB-TX
(see
Station Configuration selection
) doesn't include any switch relays
and the calibrations are made at the same point as for the pure USB Rx
calibrations.
Therefore, the calibration setup in ValiFrame Type-C is the same for the
USB-RX part:
Figure 20
Connection diagram for calibrations of the standard combination
USB-RX - USB-TX
Standard combination USB-RX & USB-TX & DP-T
The Rx-signal path in the standard combination
USB-RX + USB-TX +
DP-TX
includes one switch relay and additional cables. The calibration
setup must reflect the setup as shown in
.
Summary of Contents for N5990A Type-C
