
16
Keysight N5990A-155 DisplayPort User Guide
2
ValiFrame DisplayPort Station
• Simple 5V supply: The simple 5V power supply is just to power on a
DUT, but not to test any PDOs. You may use any fixed 5V supply with a
current capability that is sufficient for the DUT. The recommended
minimum current is 500mA.
For more information about the PDOs support and configuration, refer to
Keysight N5990A Type-C Extension User Guide
Test Instrument Configuration
Once the DisplayPort station is configured, the instrument addresses must
be set. An example of the instrument configuration is shown in
Figure 4
DisplayPort Instruments Configuration Window
After the installation process, all instruments are configured by default in
Offline
mode. In the simulation mode, hardware need not necessarily be
physically connected to the test controller PC. The ValiFrame cannot
connect to any instrument in this mode. In order to control the instruments
that are connected to the PC, the instrument address must be entered.
The address depends on the bus type used for the connection, for
example, GPIB (General Purpose Interface BUS) or LAN (Local Area
Network). Most of the instruments used in the DisplayPort station use a
Summary of Contents for N5990A-155
