12
Keysight N5990A-155 DisplayPort User Guide
2
ValiFrame DisplayPort Station
ValiFrame DisplayPort Station Configuration
Test Station Selection
The set of test instruments that are used for a specific application are
referred to as “Test Station” or just “Station”. The test station is controlled
by a suitable PC and the N5990A Test Automation Software Platform.
The ValiFrame DisplayPort Station Configurator must be started prior to
launching ValiFrame. It allows you to select an application (such as, PCIe,
HDMI, and so on) and the required set of instruments. Double-click the
DP
Station Configurator (N5990A)
icon (see
) to launch the software.
Alternatively, to access the Valiframe Station Configuration on a
Windows-based PC, click
Start > BitifEye
DisplayPort N5990A > DP
Station Configurator (N5990A)
.
Figure 1
DisplayPort Station Configurator Icon
When the Valiframe DisplayPort Station Configurator is launched, the
Valiframe Configuration Wizard
.
The available Test Stations are listed in the Select Station drop-down
options. Multiple entries can be generated through User Programming
(N5990A opt. 500) and the required station can be selected.
Summary of Contents for N5990A-155
