Keysight M9217A PXIe 2-CH, Startup Manual

Page: 20 / 36

Keysight M9217A Startup Guide 20
Power up the controller
If you are using a remote controller, power up the host computer.
If you are using an embedded controller, complete the following steps:
1 Install the embedded controller module into a compatible chassis.
– Recommended: Keysight M9018A 18 slot PXIe Chassis
2 Connect your I/O peripherals (mouse, keyboard, and monitor).
3 Power up the chassis.
Install the software
The M9217A software are located on the bundled CD (M9217-10001). The same software
are also available for free download at the Keysight website:
www.keysight.com/find/m9217a .
This installation includes the following:
– Keysight IO Libraries Suite (IOLS), which includes the Keysight Connection Expert.
– Soft Front Panel (SFP), device drivers (IVI-C and IVI-COM, and LabVIEW G), and related
user documentation for the M9217A.
1 From the CD browser, launch the installer.
2 Follow the installer prompts to install all software and documentation for the M9217A
PXIe 2-CH Digitizer, Isolated, ±256 V, 20 MSa/s, 16-Bit.
NOTE
Each PXIe module has its own device driver (IVI-C and IVI-COM, and LabVIEW G) and soft
front panel (SFP) software.