Keysight M5300A, Startup Manual

Page: 60 / 80

60 M5300A PXIe RF AWG Modules Startup Guide
3 Setting up the M5300x software
3.4.4: Installing PathWave FPGA software
For instructions on installing the KF9000B PathWave FPGA 2022 software
on your machine, refer to the PathWave FPGA 2022 User Guide available
at the KF9000B PathWave FPGA Technical Support page.
3.4.5: Installing M5300A BSP
The latest BSP file required to design the M5300A module’s FPGA is
included in the Keysight M5300x software package. There is no separate
BSP installer for M5300A modules.
The M5300A BSP can be accessed only within the PathWave FPGA Design
Environment and not separately. The PathWave FPGA 2020 software
(along with Xilinx Vivado Design Suite ) must be installed on the same
machine as the M5300x software.
Also, see “ Xilinx Vivado tool not installed ” on page 74 and “ Timing errors
during k7z file generation ” on page 75.
NOTE
The KF9000B PathWave FPGA 2022 is a licensed software for FPGA
programming using module-specific BSPs and for programming with
M5300x software. Contact Keysight Support for more information on
procuring the respective licenses.