manualshive.com logo in svg

Keysight M5300A, Startup Manual

Share
Download
Keysight M5300A Startup Manual Download Page 49

M5300A PXIe RF AWG Modules Startup Guide

49

Setting up the M5300x software

3

 

3 Follow the on-screen instructions.

For PXIe Chassis drivers and firmware

1 When installing the Keysight Chassis Family Driver, PXIe Chassis SFP

(Software Front Panel) software is automatically installed.

•

Chassis firmware version can be checked and updated using PXIe

Chassis SFP.

2 For any other chassis model being used, Keysight recommends

installing the required firmware version and its compatible chassis

driver separately.

Instructions for Python users

1 Double-click the Python installer, which you have downloaded on your

local machine.

The Python Setup window appears.

Figure 16

Initial Python Setup window

2 Make sure that both options “Install launcher for all users

(recommended)” and “Add Python 3.7 to PATH” are checked. By

default, the check box for the former option is selected and it is clear

for the latter option.

3 Click “Install Now” to install the required Python libraries.

Summary of Contents for M5300A

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands