![background image](http://html1.mh-extra.com/html/keysight/m5200a/m5200a_startup-manual_1961126064.webp)
64
M5200A PXIe Digitizer Modules Startup Guide
3
Setting up the M5200x software
•
‘Simulation mode’ disabled—This is the active mode of SFP
operation and is available when the
Simulation Mode
check box is
manually cleared. The
Simulate
button is replaced with the
Connect
button on the
Connect to Instrument
window, as shown in
. In this mode, only the active modules are displayed along
with the respective chassis number, slot number and VISA address.
Figure 32
Connect to Instrument with “Simulation Mode” disabled
This mode is used for active SFP operations. In this mode, toggling the
SFP controls changes the signal state on the selected module. The status
bar on the main window shows ‘Connected to <
VISA-address
>’ to indicate
the module that has been selected, as shown in
Summary of Contents for M5200A
