Keysight M5200A, Startup Manual

Page: 3 / 80

M5200A PXIe Digitizer Modules Startup Guide 3
Safety Summary
The following general safety precautions must be observed during all phases of operation
of this instrument. Failure to comply with these precautions or with specific warnings or
operating instructions in the product manuals violates safety standards of design,
manufacture, and intended use of the instrument. Keysight Technologies assumes no
liability for the customer's failure to comply with these requirements. Product manuals
are provided on the Web. Go to www.keysight.com and type in your product number in
the Search field at the top of the page.
WARNING
Do not use the device if it is damaged. Contact your Keysight
sales representative for replacement of device.
WARNING
Verify that all safety precautions are taken. Make all connections
to the unit before applying power. Note the external markings
described under “Safety symbols & instrument markings”.
WARNING
Do not operate the device in an explosive atmosphere or wet
environments. Do not operate the instrument around flammable
gases or fumes, vapor, or wet environments.
WARNING
Do not install substitute parts or perform any unauthorized
modification to the product. Return the product to a Keysight
Sales and Service Office to ensure that safety features are
maintained.
CAUTION
If the device is used in a manner not specified by the manufacturer,
the protection provided by the device may be impaired.
CAUTION
Do not attempt to clean the device. If cleaning the card is
absolutely necessary, follow the instructions given in “Cleaning the
module” section of this document.