Keysight E36300 Series User Manual Download Page 64

Page: 64 / 108

Step 4 – Use the All Outputs On and Off keys:

Once output delays have been set, press

[All On/Off]

to start the On delay and Off delay sequence.

[All On/Off] will turn ALL outputs on or off, whether they are configured to participate in an output on/off
delay sequence or not.

From the remote interface:

To program turn-on and turn-off delays for outputs 1 through 3:

OUTP:DEL:RISE 0.01,(@1)
OUTP:DEL:RISE 0.02,(@2)
OUTP:DEL:RISE 0.03,(@3)
OUTP:DEL:FALL 0.04,(@1)
OUTP:DEL:FALL 0.03,(@2)
OUTP:DEL:FALL 0.02,(@3)

To only include outputs 1 and 2 in a sequence :

OUTP:COUP:CHAN CH1,CH2

To turn on two coupled outputs in a sequence:

OUTP ON (@1:2)

Keysight E36300 Series User's Guide

Summary of Contents for E36300 Series













































































































Search results

Summary of Contents for E36300 Series

Reviews:

Related manuals for E36300 Series

Brands by name

Popular brands

Keysight E36300 Series, User Manual

Search results

Summary of Contents for E36300 Series

Reviews:

Related manuals for E36300 Series

Brands by name

Popular brands