Keysight E36300 Series, User Manual

Page: 3 / 108

Technical connection details 48
Use the Built-in Help System 49
View the help information for the front panel key 49
View the list of help topics 49
Firmware Update 51
Front Panel Menu Reference 52
2 General Operating Information 53
Turning the Unit On 54
View the error log 55
Controlling the Outputs 56
Step 1 - Select an output 56
Step 2 - Set the output voltage and current 56
Step 3 - Enable the output 57
Step 4 - View the output voltage and current 57
Constant voltage and constant current 58
Using the Protection Function 59
Protection function 59
Configuring protection 59
Clears and OVP and OCP Event 61
Specifying 2-Wire or 4-Wire Sense (E36312A and E36313A Only) 62
Using the Tracking Operation 62
Configuring the Output Turn On Turn Off Sequence (E36312A and E36313A Only) 63
Step 1 – Set the output voltage and current of the output channels: 63
Step 2 – Configure the turn-on turn-off delays: 63
Step 3 – Coupling selected outputs: 63
Step 4 – Use the All Outputs On and Off keys: 64
Specifying the Operation Mode (E36312A and E36313A Only) 65
Using the Digital Control Port (E36312A and E36313A Only) 66
Bi-directional digital IO 66
Digital input 68
Fault output 68
Inhibit input 69
Fault/inhibit system protection 70
Trigger input 71
Trigger output 72
Output couple controls 72
Using the Output LIST (E36312A and E36313A Only) 75
Step 1– Add/remove steps to/from the LIST 75
Step 2 – Configure the output sequence 76
Step 3 – Run the output sequence list 78
Using the Data Logger Function (E36312A and E36313A Only) 80
Logging data 80
Step 1 – Program the sequence for the output channels 80
Step 2 – Configure the data logger traces 81
Step 3 – Configure the data logger properties 82
Step 4 – Turn on Output 1, start the sequencing and log the data. 82
Step 5 – Export the data 83
Data logger view 84
Adjusting the waveform display 85
Data logger properties and waveform settings 86
Save the datalog 88
Keysight E36300 Series User's Guide 3