30
DP0010A/11A/12A/13A Differential Active Probes User’s Guide
3
Setting up and Using DP0010A/12A/13A Probes
Option 3: Using Adjustable Probing Browser
This accessory has variable pitch pins to allow you to
quickly probe different points on your DUT. You can adjust
the spacing between these pins to span up to 8.6 mm.
Gently rotate the pins of this accessory to adjust the tip
span as per your requirement.
Option 4: Using Solder-in Y-lead Tip
This accessory allows you to extend the reach of the probe
with a solder-in probing option.
1. Solder the leads of this accessory to the test points.
2 Insert the soldered Y-lead tip into the probe tip.
See
for Solder-in Y-lead Tip dimensions.
Option 5: Using Socketed Y-lead Tip
This accessory allows you to extend the reach of the probe.
You can use it to:
- either connect directly to 0.8 mm round pins or 0.64 mm
square pins on the test board.
- or connect to the standard/optional test clip accessories
available for DP001xA probes.
See
for Socketed Y-lead Tip dimensions.
