24
DP0010A/11A/12A/13A Differential Active Probes User’s Guide
3
Setting up and Using DP0010A/12A/13A Probes
On Infiniium GUI
1
Click the
Probe Offset... / Normal Offset..
.option in the
Probe System
section.
2
In the
Probe Offset
dialog box, choose the offset behavior option based on your
choice of differential or single-ended measurement.
Normal Offset
Probe Offset
Offset is applied at the oscilloscope channel.
The vertical offset control on the oscilloscope’s
front-panel controls the channel’s offset.
Offset is applied at the probe.
The vertical offset control on the oscilloscope’s
front-panel controls the probe offset.
Used when measuring differential signals
Used when measuring single-ended signals
Probe offset is not used and set to zero.
Channel offset is not used and set to zero.
