manualshive.com logo in svg

Keysight Technologies U4301, User Manual

Share
Download
Keysight Technologies U4301 User Manual Download Page 89

Keysight U4301 PCIe Gen3 Analyzer User’s Guide

89

Viewing PCIe Gen3 Packets

8

Viewing a Traffic Overview Chart

You can view the computed traffic overview statistics as a band chart in the Traffic Overview tab. 

To display a traffic overview chart

1 After you have computed traffic overview statistics, click the 

Chart

 checkbox from the 

Options

 

groupbox in the Traffic Overview tab.

A band chart is displayed for the packet types found in the computed traffic overview statistics. 

The following screen displays a traffic overview band chart. 

Understanding the Displayed Traffic Overview Chart

• In the traffic overview chart, color coding is used to differentiate packet types based on directions. 

For instance, in the above screen, blue and orange colors are used to represent packet types in 

the upstream and downstream directions respectively. 

• For each packet type found in trace, there is a grid row in the chart. A grid row is used to plot the 

number of packets of that type for upstream as well as downstream directions. The number of 

packets for a packet type are plotted over the period of time as X-axis. The Y-Axis of the chart 

displays the applicable packet types.

• The traffic overview chart is always aligned with the packet types list on the left to allow you to 

easily map the band rows with the packet types. 

Customizing the Traffic Overview Chart

If required, you can customize the traffic overview chart in terms of:
• the color coding used in the chart for packets in upstream and downstream directions and color 

coding to represent packets with errors.

• the packets types which you want to display in the traffic overview statistics and chart. 
• hiding or displaying the Y-axis of the chart.

Summary of Contents for U4301













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands