Keysight Technologies U4301 User Manual Download Page 133

Page: 133 / 204

Keysight U4301 PCIe Gen3 Analyzer User’s Guide

133

Computing and Viewing Decoded Transactions

Visualizing a Transaction Set (Super Transaction)

At times, you may want to visualize a decoded transaction as a super transaction with all its related

transactions forming a complete set. This provides a visual sequential flow of transactions that were

related to a particular transaction.

To visualize a transaction set

1 Right-click a decoded transaction.
2 Select

Visualize Transaction...

from the context menu.

For instance, in the following screen, the

NVMe Identify

transaction has been visualized as a

complete set of transactions.

In the above screen, the transaction set for the NVMe Identify transaction:
• begins with the SQDB (Submission Queue Doorbell) transaction.
• followed by the SQ (memory read and completion with data) transaction and then the PRP entries

used for the Identify command.

• then the Command Completion entry to the Completion Queue (CQ) transaction.
• then the MSI-X interrupt generation transaction.

Summary of Contents for U4301













































































































































































































Search results

Summary of Contents for U4301

Reviews:

Brands by name

Popular brands

Keysight Technologies U4301, User Manual

Search results

Summary of Contents for U4301

Reviews:

Brands by name

Popular brands