Keysight Technologies U4301 User Manual Download Page 126

Page: 126 / 204

Computing and Viewing Decoded Transactions

126

Keysight U4301 PCIe Gen3 Analyzer User’s Guide

Interpreting and Navigating Through the Transaction Decode Results

Transactions are decoded and computed from a set of captured PCIe packets that contain the

storage protocol information associated with that transaction.

Decoded transactions are displayed in the

Transaction Decode

tab in an order based on the

timestamp of the first packet associated with a transaction. One or many PCIe packets may be

associated with a transaction.

Transaction Details Pane

In the left pane of the Transaction Decode tab, transactions with their details are displayed. In this

pane, a transaction is uniquely identified by a Transaction ID.

The details displayed for transactions vary based on their type and the applicable storage protocol.

Moving the mouse pointer to a field of a transaction presents a tool tip with information about that

field.

A color coding scheme is used to clearly indicate transactions of different types. Errored transactions

are displayed in red.

Refer to the topic

“Viewing NVMe Transactions"

on page 135 and

“Viewing AHCI Transactions"

page 147 to get an understanding of how NVMe and AHCI transactions are decoded and displayed.

NOTE

If you are displaying data captured from multiple U4301A/B modules in a single Protocol Viewer

instance, then transactions from these multiple modules will be interleaved based on the

timestamp of the first packet in the transaction.
To display transactions for each module separately, you can add a Protocol Viewer instance to

each module in the Overview pane of the Logic and Protocol Analyzer GUI.

Summary of Contents for U4301













































































































































































































Search results

Summary of Contents for U4301

Reviews:

Related manuals for U4301

Brands by name

Popular brands

Keysight Technologies U4301, User Manual

Search results

Summary of Contents for U4301

Reviews:

Related manuals for U4301

Brands by name

Popular brands