15 | Keysight | Millimeter Wave Network Analyzers (N5290A/N5291A) - Cofiguration Guide
Measurement Accessories
The following table lists the currently available accessories that may be used with
Keysights millimeter wave network analyzer solutions. These accessories are not
supplied with the N5290A or N5291A and can be purchased separately.
Accessory Type
Model Number Description
Calibration kit
85059B
DC to 120 GHz 1.0mm Calibration kit
Verification kit
85059V
1.0 mm Verification kit
Power sensors
U8489A
DC to 120 GHz 1.0 mm USB power sensor
1
V8486A
50 to 75 GHz Waveguide power sensor
Test port cables
11500JK10
110 GHz, 1.0 mm (m-f) Test port cable (10 cm)
3
11500I
110 GHz, 1.0 mm (f-f) Test port cable (8.8 cm)
3
11500J
110 GHz, 1.0 mm (m-f) Test port cable (16 cm)
3
11500K
110 GHz, 1.0 mm (m-f) Test port cable (20 cm)
3
11500K
110 GHz, 1.0 mm (m-f) Test port cable (24 cm)
3
Waveguide adapters
V281C
1.0 mm (f) to V-band waveguide adapter
V281D
1.0 mm (m) to V-band waveguide adapter
W281C
1.0 mm (f) to V-band waveguide adapter
W281D
1.0 mm (m) to V-band waveguide adapter
1.0 mm Coaxial adapters
11920A
110 GHz, 1.0 mm (m) to 1.0 mm (m) adapter
11920B
110 GHz, 1.0 mm (f) to 1.0 mm (f) adapter
11920C
110 GHz, 1.0 mm (m) to 1.0 mm (f) adapter
Y1900B
120 GHz , 1.0 mm (f) to 1.0 mm (f) Ruggedized adapter
Y1900C
120 GHz , 1.0 mm (m) to 1.0 mm (f) Ruggedized adapter
Y1910A
120 GHz , 1.0 mm (m) to 1.0 mm (m) Standard adapter
Y1910B
120 GHz , 1.0 mm (f) to 1.0 mm (f) Standard adapter
Y1910C
120 GHz , 1.0 mm (m) to 1.0 mm (f) Standard adapter
1.85 mm Coaxial adapters
11921E
1.0 mm (m) to 1.85 mm (m) adapter
11921F
1.0 mm (f) to 1.85 mm (f) adapter
11921G
1.0 mm (m) to 1.85 mm (f) adapter
11921H
1.0 mm (f) to 1.85 mm (m) adapter
2.4 mm Coaxial adapters
11922A
1.0 mm (m) to 2.4 mm (m) adapter
11922B
1.0 mm (f) to 2.4 mm (f) adapter
11922C
1.0 mm (m) to 2.4 mm (f) adapter
11922D
1.0 mm (f) to 2.4 mm (m) adapter
Package launch
11923A
1.0 mm (f) Microcircuit connector launch assembly
1. Recommended for use with N5290/91A millimeter wave network analyzer solution.
2. The 11500IKxx cable is recommended for use with the probe positioners on the Cascade probe station.
3. These cables will operate to 120 GHz mode free even though they are specified to work to 110 GHz.
Цены и срок поставки уточняйте на сайте
, по телефону:
+ 7 495 215-57-17
или
