13 | Keysight | Millimeter Wave Network Analyzers (N5290A/N5291A) - Cofiguration Guide
Configuring OML and VDI Banded Frequency Extenders with the N5290/91A
In addition to supporting the broadband frequency extenders from Keysight the N5292A test set controller may be configured to drive
Keysight supported frequency extenders from OML and VDI.
For a complete listing of supported frequency extenders available, please refer to the “Banded Millimeter Wave Network Analysis to
1.5 THz” technical overview literature number 5992-2177EN.
To interface the OML and VDI modules to the N5292A, add product number N5290A304 to the configuration of the N5290/91A.
This cable adapter includes a 1.2 m length cable with an interface to the N5292A and 3.5 mm (m) connectors for the RF, LO and IF
connection to the frequency extenders. For VDI /OML frequency extenders that require a longer length cable consider using the
N5261A/62A to control these modules.
Product description
Adapter cable
Power supply requirements
All OML frequency extenders
N5290A304
1. N5260AK91 includes OML DC power supply adapter and U1570B power supply
2. A N5260AK91 is required for each OML frequency extender
VDI standard frequency extenders only
N5290A304
Add option VDI-175 DC power supply
VDI mini frequency extenders
N5290A304
Includes DC power supplies with mini frequency extenders
Supported Software Application Options
The following listed software options will operate over the full range of the pre-configured N5290/91A systems.
Software product
Description
N5290/91
Start frequency support
900 Hz
10 MHz
S93007A
Automatic fixture removal
Yes
Yes
S93010A
Time domain analysis
Yes
Yes
S93015A
Dynamic uncertainty for S-parameter measurements
n/a
Yes
S93025A
Basic pulsed-RF measurements
n/a
Yes
1
S93026A
Advanced pulsed-RF measurements
n/a
Yes
2
S93029A
Noise figure measurements
n/a
Yes
3
S93080A
Frequency-offset measurements
Yes
Yes
S93082A
Scalar mixer/converter measurements
Yes
Yes
S93084A
Embedded-LO capability
n/a
Yes
S93086A
Gain-compression measurements
Yes
Yes
S93088A
Source phase control
n/a
Yes
S93089A
Differential and I/Q device measurements
n/a
Yes
4
S930909A
Spectrum analysis up to 90 GHz
n/a
Yes
S93093A
Spectrum analysis to 120 GHz
n/a
Yes
S93094A
Spectrum analysis beyond 120 GHz
n/a
Yes
S93460A
True mode stimulus
Yes
Yes
4
S93118A
Fast CW mode
Yes
Yes
1. Pulse requires hardware Options 021 and 022 on the PNA or PNA-X
2. S93026 limited to wideband pulse when used as a N5290/91A system level
3. Noise figure is supported for down converters
4. Require 4-port configurations of the N5290/91A
Цены и срок поставки уточняйте на сайте
, по телефону:
+ 7 495 215-57-17
или
