Keysight Technologies N5221A Configuration Manual Download Page 35 | Manualshive

Page: 35 / 36

background image

Page 35

Find us at

www.keysight.com

General Accessories

Spare drive

1

– N5242-60133 spare drive with mounting cradle for all PNA with

Windows 7 and 2.2 GHz CPU (version 7)

– N8983A spare drive with mounting cradle for all PNA with

Windows 7 and 2.0 GHz i7 or 1.87 GHz CPU (version 6)

– N5242-60044 spare drive with mounting cradle for N524xA with

Windows XP and 2.0 GHz Core 2 Duo CPU (version 5)

– N5242-60088 spare drive with mounting cradle for N522xA/4xA

with Windows XP and 2.0 GHz i7 CPU (version 6)

– N5235-60060 spare drive with mounting cradle for N523xA with

Windows XP and 1.87 GHz CPU (version 6)

– Upgrading to 2.2 GHz CPU is recommended for N5241A/2A with

1.6 GHz CPU by ordering N8984A-PC7

– N8982A spare drive with mounting cradle for E836xC and N5230C

– N8981A spare drive with mounting cradle for E836xA/B and

N5230A with 1.1 GHz CPU

V Band
V11644A standard, WR-15: 50 to 75 GHz. Includes:

– 11644-60025 V-band termination

– 11644-20015 V/W-band short

– 11644-20013 V-band shim

– 11644-60012 V-band standard section

W Band
W11644A standard, WR-10: 75 to 110 GHz.Includes:

– 11643-60026 W-band termination

– 11644-20015 V/W-band short

– 11644-20014 W-band shim

– 11644-60013 W-band standard section

Verification kits

All Keysight verification kits include:

– precision Z

0

airline or match thru

– mismatched airline or mismatch thru

– fixed attenuators

– traceable measured data and uncertainties

85051B 45 MHz to 18 GHz 7 mm kit
Includes attenuators, airline and mismatch airline with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards. Test
procedure is provided in the service manual.

85053B 300 kHz to 26.5 GHz 3.5 mm kit
Includes attenuators, airline and mismatch airline with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards. Test
procedure is provided in the service manual.

85055A 300 kHz to 18 GHz Type-N kit
Includes attenuators, airline and mismatch airline with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards. Test
procedure is provided in the service manual.

85057B 45 MHz to 50 GHz 2.4 mm kit
Includes attenuators, airline and mismatch airline with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards. Test
procedure is provided in the service manual.

85058V 45 MHz to 67 GHz 1 85 mm kit
Includes attenuators, match thru and mismatch thru with data on
a 3.5-inch disk for use in confirming accuracy enhanced system
measurement performance, traceable to national standards. Test
procedure is provided in the service manual.

1 All spare drives are solid-state drive. For more information, refer to

na.support.keysight.com/pna/hdnumbers.html

«
...
33
34
35
36
»

Summary of Contents for N5221A





































Reviews:

No comments

Related manuals for N5221A

Brand: Dallas Brass Pages: 19

Brand: OHAUS Pages: 52

Professional Plus

Brand: YSI Pages: 28

Brand: Autometers Systems Pages: 16

Brand: WATERGUARD Pages: 2

Brand: PITSID Pages: 22

Brand: Swan Analytical Instruments Pages: 102

Microlog GX Series

Brand: SKF Pages: 342

Brand: Badger Meter Pages: 24

Brand: PCE Instruments Pages: 6

Brand: Proteus Pages: 4

Brand: LaserLiner Pages: 84

Brand: Roland Pages: 224

Brand: Anslut Pages: 11

Brand: Silverline Pages: 2

Brand: Hanna Instruments Pages: 11

Brand: Kawai Pages: 36

Brand: Triax Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands