manualshive.com logo in svg

Keysight Technologies N5221A, Configuration Manual

Share
Download
Keysight Technologies N5221A Configuration Manual Download Page 21

Page 21

Find us at 

www.keysight.com

 

PNA Family Network Analyzer Upgrade Kits

Frequency, test ports, test set and power configurations

Upgrade kits are available to add options after initial purchase. To upgrade the PNA-X/PNA/PNA-L, order the corresponding 
item number. The model and serial numbers of the instrument to be retrofitted are required as part of the order.

1   Frequency upgrade options from 8.5/13.5/20/26.5 GHz to 43.5/50 GHz and 43.5/50 GHz to 67 GHz are not available. Trade-in is recommended.
2   Not available on N5227A.
3   Not available on N5249A or N5247A

Description

Required Option

For PNA-X 

Series

For PNA 

Series

For PNA-L 

Series

User

Installable

Frequency upgrade

1

Extend analyzer's frequency range to 13.5 GHz

N5239A or N5249A

N5249AU-913

n/a

N5239AU-613

No

Extend analyzer's frequency range to 20 GHz

N5239A or N5231A

n/a

n/a

N5239AU/31AU-620

No

Extend analyzer's frequency range to 26.5 GHz

N5241A, N5249A, or 
N5221A

N5241AU-960/
49AU-960

N5221AU-626

n/a

No

Extend analyzer's frequency range to 50 GHz

N5244A, N5224A or 
N5234A

N5244AU-990

N5224AU-650

N5234AU-650

No

Test ports

Expand 2-ports, single source without 

configurable test set to 4-ports

N522xA-200

n/a

N522xAU-600

n/a

No

Expand 2-ports, single source with 

configurable test set to 4-ports

N524xA-200 or 
N522xA-201

N524xAU-940

N522xAU-601

n/a

No

Expand 2-ports, single source with 

configurable test set and extended power range to 4-ports

N522xA-217

n/a

N522xAU-617

n/a

No

Expand 2-ports, single source with 

configurable test set, extended power range and bias-tees 

to 4-ports

N524xA-219 or 
N522xA-219

N524xAU-942

N522xAU-619

n/a

No

Expand 2-ports, internal second source with configurable 

test set, extended power range, bias-tees, combiner and 

mechanical switches to 4-ports

N524xA-224

N524xAU-944

n/a

n/a

No

Test set and power configuration

Add configurable test set, 2-ports

N522xA-200

n/a

N522xAU-201

n/a

No

Add configurable test set and source 

attenuators, 2-ports

N523xA-200

n/a

n/a

N523xAU-216

No

Add extended power range, 2-ports

2

N522xA-201

n/a

N522xAU-217

n/a

No

Add bias-tees, 2-ports

2

N522xA-217

n/a

N522xAU-219

n/a

No

Add extended power range and bias-tees, 2-ports

N524xA-200 or 
N5227A-201

N524xAU-921

N5227AU-219 

n/a

No

Add internal 2nd source, combiner and 

mechanical switches, 2-ports

N524xA-219 or 
N522xA-219

N524xAU-922

n/a

n/a

No

Add high power configurable, 2-ports

N524xA-219 or 224

N524xAU-H85

3

n/a

n/a

No

Add configurable test set, 4-ports

N522xA-400

n/a

N522xAU-401

n/a

No

Add configurable test set and source 

attenuators, 4-ports

N523xA-400

n/a

n/a

N523xAU-416

No

Add extended power range, 4-ports

2

N522xA-401

n/a

N522xAU-417

n/a

No

Add bias-tees, 4-ports

2

N522xA-417

n/a

N522xAU-419

n/a

No

Add extended power range and bias-tees, 4-ports

N524xA-400 or 
N5227A-401

N524xAU-926

N5227AU-419

n/a

No

Add internal 2nd source, combiner and 

mechanical switches, 4-ports

N524xA-419 or 
N522xA-419

N524xAU-927

n/a

n/a

No

Add high power configurable, 4-ports

N524xA-419 or 423

N524xAU-H85

3

n/a

n/a

No

Summary of Contents for N5221A





































Reviews:

No comments

Brands by name

Popular brands

Load more brands