Enumeration
This is the list of enumeration names, with their possible values.
Enumeration
Description
ELaserState
Enumerates the possible laser states, on or off.
NotSet
LaserOff
LaserOn
ELaserWvl
Enumerates the possible laser wavelengths.
NotSet
Wvl_850nm
Wvl_1310nm
Wvl_1550nm
EMeasMode
Specify if you are doing single ended or differential measurements.
Note: differential measurements require a 4-port network analyzer.
NotSet
SingleEnded
Differential
EMeasType
Enumerates the different LCA measurement types
NotSet
EE
EO
OE
OO
EModBiasOpt
Specify how often a modulator bias voltage optimization has to be performed.
Once: only once when the laser is switched on.
EverySweep: prior to each measurement started by the LCA.
Continuous: the optimization loop runs continuously.
NotSet
Once
EverySweep
Continuous
EOpticalInput
Enumerates the optical inputs on the optical test head’s front panel. High power
input is comparable to input 2 and standard to input 1.
NotSet
Standard
HighPower
ERFSwitch
Enumerates the RF switches in a switched LCA system
NotSet
Source
Receiver
ERFSwitchState
Enumerates the possible settings of the RF switches
UnKnown
Thru
Intern
Remote Operation
26
Keysight N437x Series Lightwave Component Analyzer, Programmer’s Guide
Possible values