N2893A Probe
N2893A 100 MHz Current Probe User’s Guide
11
Using the Probe
Making Measurements
1
Power on the oscilloscope.
2
Connect the probe to one of the scope’s channels.
Figure 2
Connecting the Probe to the Oscilloscope
WARNING
Ensure all safety warnings and precautions are followed. Before using the probe,
study the warning and precautions in
“Safety Information"
on page 7.
Also, take precautions mentioned in
“Protecting the Probe Against Damage
Resulting from Excessive Input"
on page 15.
NOTE
This probe is NOT compatible with 50
Ω
only Infiniium oscilloscopes (for example, the
90000A series oscilloscopes). Use the N5449A high impedance probe adapter for use
with Infiniium 90000X Series oscilloscope. The input coupling is automatically selected
to DC, as the terminator is plugged into the AutoProbe interface.
NOTE
When the probe is connected to a scope channel, the AutoProbe interface recognizes the
probe as an N2893A and automatically configures several settings on the channel to
which the probe is connected.
