background image

2

E2655C Probe Deskew and Performance Verification Kit User’s Guide

Notices

© Keysight Technologies 2003, 2004, 2013, 

2016

No part of this manual may be reproduced in 

any form or by any means (including elec-

tronic storage and retrieval or translation 

into a foreign language) without prior agree-

ment and written consent from Keysight 

Technologies as governed by United States 

and international copyright laws.

Manual Part Number

E2655-92004

Edition

Fifth Edition, August 2016

Available in electronic format only

Keysight Technologies

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

THE MATERIAL CONTAINED IN THIS DOCU-

MENT IS PROVIDED "AS IS," AND IS SUB-

JECT TO BEING CHANGED, WITHOUT 

NOTICE, IN FUTURE EDITIONS. FURTHER, 

TO THE MAXIMUM EXTENT PERMITTED BY 

APPLICABLE LAW, KEYSIGHT DISCLAIMS 

ALL WARRANTIES, EITHER EXPRESS OR 

IMPLIED WITH REGARD TO THIS MANUAL 

AND ANY INFORMATION CONTAINED 

HEREIN, INCLUDING BUT NOT LIMITED TO 

THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE. KEYSIGHT SHALL NOT BE LIABLE 

FOR ERRORS OR FOR INCIDENTAL OR CON-

SEQUENTIAL DAMAGES IN CONNECTION 

WITH THE FURNISHING, USE, OR PERFOR-

MANCE OF THIS DOCUMENT OR ANY 

INFORMATION CONTAINED HEREIN. 

SHOULD KEYSIGHT AND THE USER HAVE A 

SEPARATE WRITTEN AGREEMENT WITH 

WARRANTY TERMS COVERING THE MATE-

RIAL IN THIS DOCUMENT THAT CONFLICT 

WITH THESE TERMS, THE WARRANTY 

TERMS IN THE SEPARATE AGREEMENT WILL 

CONTROL.

Technology Licenses

The hardware and/or software described in 

this document are furnished under a license 

and may be used or copied only in accor-

dance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer soft-

ware," as defined by Federal Acquisition 

Regulation ("FAR") 2.101. Pursuant to FAR 

12.212 and 27.405-3 and Department of 

Defense FAR Supplement ("DFARS") 

227.7202, the U.S. government acquires 

commercial computer software under the 

same terms by which the software is cus-

tomarily provided to the public. Accordingly, 

Keysight provides the Software to U.S. gov-

ernment customers under its standard com-

mercial license, which is embodied in its 

End User License Agreement (EULA), a copy 

of which can be found at 

http://www.key-

sight.com/find/sweula

. The license set 

forth in the EULA represents the exclusive 

authority by which the U.S. government may 

use, modify, distribute, or disclose the Soft-

ware. The EULA and the license set forth 

therein, does not require or permit, among 

other things, that Keysight: (1) Furnish tech-

nical information related to commercial 

computer software or commercial computer 

software documentation that is not custom-

arily provided to the public; or (2) Relinquish 

to, or otherwise provide, the  government 

rights in excess of these rights customarily 

provided to the public to use, modify, repro-

duce, release, perform, display, or disclose 

commercial computer software or commer-

cial computer software documentation. No 

additional government requirements beyond 

those set forth in the EULA shall apply, 

except to the extent that those terms, rights, 

or licenses are explicitly required from all 

providers of commercial computer software 

pursuant to the FAR and the DFARS and are 

set forth specifically in writing elsewhere in 

the EULA. Keysight shall be under no obliga-

tion to update, revise or otherwise modify 

the Software.  With respect to any technical 

data as defined by FAR 2.101, pursuant to 

FAR 12.211 and 27.404.2 and DFARS 

227.7102, the U.S. government acquires no 

greater than Limited Rights as defined in 

FAR 27.401 or DFAR 227.7103-5 (c), as 

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It 

calls attention to an operating proce-

dure, practice, or the like that, if not 

correctly performed or adhered to, 

could result in damage to the product 

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until 

the indicated conditions are fully 

understood and met. 

WARNING

A WARNING notice denotes a hazard. 

It calls attention to an operating pro-

cedure, practice, or the like that, if not 

correctly performed or adhered to, 

could result in personal injury or 

death. Do not proceed beyond a 

WARNING notice until the indicated 

conditions are fully understood and 

met.

 

Summary of Contents for E2655C



















Reviews: