Front and Rear Panel Symbols:
The CE mark is a registered
trademark of the European
Community.
The C-Tick mark is a
registered trademark of the
Australian Spectrum Management Agency.
This symbol indicates
product compliance
with the Canadian Interference-Causing
Equipment Standard (ICES-001). It also
identifies the product is an Industrial
Scientific and Medical Group 1 Class A
product (CISPR 11, Clause 4).
South Korean Class A EMC
Declaration. this equipment is
Class A suitable for professional
use and is for use in elect-
tomagnetic environments outside of the
home.
A
급 기기
(
업무용 방송통신기자재
)
이 기기는 업무용
(A
급
)
전자파적합기
기로서 판 매자 또는 사용자는 이 점을
주
의하시기 바라 며
,
가정외의 지역에서
사용하는 것을 목적으 로 합니다
.
This symbol indicates separate
collection for electrical and
electronic equipment, mandated
under EU law as of August 13,
2005. All electric and electronic equipment
are required to be separated from normal
waste for disposal (Reference WEEE
Directive, 2002/96/EC).
This symbol on an instrument
means caution, risk of danger.
You should refer to the operating
instructions located in the user documen-
tation in all cases where the symbol is
marked on the instrument.
This symbol indicates the time
period during which no hazardous
or toxic substance elements are
expected to leak or deteriorate during
normal use. Forty years is the expected
useful life of the product.
This symbol indicates the
instrument is sensitive to electro-
static discharge (ESD). ESD can
damage the highly sensitive components in
your instrument. ESD damage is most likely
to occur as the module is being installed or
when cables are connected or disconnected.
Protect the circuits from ESD damage by
wearing a grounding strap that provides a
high resistance path to ground. Alternatively,
ground yourself to discharge any built-up
static charge by touching the outer shell of
any grounded instrument chassis before
touching the port connectors.
This symbol denotes a hot surface.
The side cover of the module will be
hot after use and should be allowed
to cool for several minutes.
