3-20 85053B
Use, Maintenance, and Care of the Devices
Connections
3-
6.
Push the airline's female coupling sleeve forward and turn the connecting
nut (of the adapter attached to the cable) to mate the outer conductor of
the airline with the adapter. Connect the nut finger tight. Do not
overtighten.
7.
Remove the protective end cap from the male end of the airline. Align and
insert the male end of the airline center conductor into the female end of
the cable adapter and mate the outer conductors. Connect the nut finger
tight. Do not overtighten.
8.
Using an open-end wrench, hold the sliding female coupling sleeve on the
female end of the outer conductor to keep it from rotating. Refer to
. Use the torque wrench recommended for use with this kit to tighten
the adapter connecting nut to the specified torque. Refer to
Connection Using a Torque Wrench” on page 17
.
9.
Using an open-end wrench to keep the cable adapter from rotating, use
the torque wrench recommended for use with this kit to tighten the airline
male-end connecting nut to the specified torque.
Figure 3-10
Torquing the Connections
How to Separate a Connection
1.
Use an open-end wrench to prevent the device body from turning.
2.
Use another open-end wrench to loosen the connector nut.
3.
Complete the disconnection by hand, turning only the connector nut.
Do
not
turn the device body. Only turn the connector nut. Damage to the
center conductor can occur if the device body is rotated.
Summary of Contents for 85053B
