Keysight Technologies 85053B, User'S And Service Manual

Page: 5 / 58

1- 1
Keysight 85053B 3.5 mm
Verification Kit
User’s and Service Guide
1 General Information
Verification Kit Overview
The Keysight 85053B 3.5 mm verification kit provides a set of standards with
known characteristics, traceable to a reference (golden) standard in Keysight
Technologies calibration lab. This set of standards is used to verify your
measurement calibration and also to verify that your network analyzer system
is operating within its specifications. The frequency range covered by the
85053B is from 300 kHz to 26.5 GHz.
Kit Contents
The 85053B verification kit includes the following items:
— 20 dB attenuator
— 40 dB attenuator
— 25
Ω
mismatch airline
— 50
Ω
airline
— User’s and Service Guide (this manual)
— Storage box
— USB drive that contains factory-measured verification data for use with the
PNA system verification process
— Data sheet for each device that contains factory-measured verification data
— Anti-virus scan report
Refer to
Chapter 6 for a complete list of replaceable part numbers.
IMPORTANT! Backup copies of the data sheets, anti-virus scan reports,
and the data on the USB drive should be made immediately upon receipt
of the verification kit.
A file containing the verification data for your kit is maintained for one year
from the time of measurement. If you lose this data, contact Keysight —
see “Contacting Keysight” on page 4 for a list of contacts.