KeyScan Ltd.
www.keyscan.com
Page 4 of 9
STAGE 2 - CONNECT AND TEST THE KS810-P KEYBOARD
Connect the KeyScan USB2 high speed cable to a USB2 port on the PC (do not connect to external USB1.1 hub).
Connect the other side of the USB2 cable to the middle connector (up steam USB port) on the KS810-P rear
connector panel.
Do not connect the power adapter yet! If you already connected the power please
refer to the trouble shooting or call KeyScan support before you proceed with the
installation!
The Windows system should recognize the new connected keyboard and USB2 HUB and install their drivers
automatically.
The green LED on the connector panel should be blinking; it is located between the power connector and the USB
upstream connector. The blinking light indicates that the PC recognized the USB2 hub of the KS810-P and both the
hub and the keyboard are functional.
WARNING
Make sure you are using only the original KeyScan supplied USB2 cable and connect it directly to the PC USB2 port, no extension USB cable or external
USB hub are allowed. If the scanner is connected to USB1.1 port or to external desktop USB hub you may experience unpredicted behavior and errors.
