KeyScan Ltd.
www.keyscan.com
Page 3 of 9
STAGE 1 - CHECK THE BOX CONTENT AND PC MINIMUM REQUIREMENTS
The KS810-P package contains the following items:
KeyScan KS810-P integrated keyboard-scanner device
The KeyScan wall-mount power adapter
The KeyScan USB2 communication cable
White calibration sheet (any clean A4 size printer paper can be used for calibration).
Software CD & this installation instructions card
The minimum PC configuration requirements:
PC Pentium 4 or higher with CD/DVD reader and at least 1GB of internal memory (RAM).
1 free USB2.0 (high speed) port to connect the KeyScan, you must
connect the KS810-P scanner directly to your PC USB2 connector, on the back of your
PC
, do not connect it through a USB hub or front panel port of your PC computer.
Free disk space (at least 1GB) for installation, recommended at least 2G byte free space for runtime.
Operating system - Microsoft Windows XP SP2 or higher, Vista, Window7, support both 32 and 64 bit versions.
Microsoft .NET software – make sure you have .NET version 2.0 SP1 or higher. You can download .NET from Microsoft free of charge.
WARNINGS
Use only the original KeyScan power-adapter, never attempt to use other power adapter which may cause permanent damage to the KS810-P.
Use only KS810-P supplied hi-quality USB2 cable. The KeyScan is a high speed device. Low quality USB cables may cause random errors and unexpected problems.
Connect the KS810-P scanner directly to you PC USB2 connector. Do not connect the scanner to desktop USB hub.
If your PC USB ports are of USB2 type as required but you have an external desktop USB hub (most likely of USB1.1 type) and you connect the scanner to the hub, then the whole connection
behaves as a USB1.1 connection and not as a USB2 connection. Connecting the KS810-P scanner to a non USB2 port will result random installation and scanning problems.
