Keys Fitness 2250, Owner'S Manual

Page: 21 / 45

Assembly
21
Step 8
Slide Side Top Beam B (129) onto both Guide Rods (24) and secure using two Washers (102), two Spring
Washers (103), and two Bolts (97). Also, secure Side Top Beam B (129) to Side Top Beam A (122) using two
Nylon Lock Nuts (104), four Washers (102), and two Bolts (153).
Attach Leg Extension (10) to Seat Pad Support Receptacle (2) using Shaft (72), one Washer (119), one
Spring Washer (115), and one Allen Bolt (118).
Slide Foam Frame w/ Shaft (11) through Leg Extension (10). Attach Foam Frame w/o Shaft (12) to Foam
the end of Foam Frame w/ Shaft (11). Insert Slip Tension Pin (80) through the hole where the both foam
frames meet.
Note: You may need to use a rubber mallet to install Slip Tension Pin (80).
Figure 8