38
13.5 Lowering the thermostat
–in the case of opening the contacts of thermostat
temperature the second circuit is reduced by the value set in this parameter.
13.6 Increasing the temperature of the boiler
– circulation set tempe the
value of raising the temperature of the boiler - this is the minimum boiler temperature
that will be set on the boiler.
13.7 The hysteresis circuit 2
– parameter determines how much the temperature
must fall the second circuit to control heat attached.
13.8 The minimum temperature circuit 2
– The minimum temperature is maintai-
ned at a second circuit.
13.9 Maximum temperature circuit 2
– The maximum temperature that can be
reach the second circuit
13.10 The time of the actuator
– time single switch actuator during a slow opening
or closing the valve.
